Worth Data RF Terminal 7000 - Manual (Page 69)

So, when the RF Terminal transmits the data to the host, it will be in the following format:
RF Terminal ID + T1: DATA + CR
or
RF Terminal ID + T2: DATA + CR
or
RF Terminal ID + T1: DATA + T2: DATA + CR
For further information, see your Printing Systems Programming Manual on the CD ROM shipped with the
printer.
Zebra QL 3 Printer
The QL 3 Printer is used for label printing. It doesn’t have Magstripe input. The classic application is for
printing shelf labels during shelf price verification:
• The operator scans a shelf label.
• The Terminal transmits scanned data to the host computer.
• The host computer looks up the price, description, etc. and transmits the computer price back and sends the
necessary commands to the attached QL 3 printer to prints a new shelf label with the correct price.
• The terminal operator then peels off the label and applies it to the shelf.
Each printer is shipped with a no charge roll of thermal paper that can be used for development, including
determining the exact label size that best fits you needs and the capabilities of the printer.
We stock the 2” and 3” QL 3 printers with several label sizes immediately available including:
Part Number Description Price/Roll
E2L1 2"x1" Vinyl Shelf Adhesive Labels $3.50
E2L2 2"x1.25" Paper Permanent Adhesive Labels $2.50
E2L3 2”x2” Paper Permanent Adhesive Labels $2.50
E2L4 2”x1.25” Vinyl Shelf Adhesive Labels $3.00
E3L1 3"x1" Vinyl Shelf Adhesive Labels $7.50
E3L2 3"x1.75" Paper Permanent Adhesive Labels $5.00
Shelf adhesive labels are designed for ease of removal to facilitate replacement. Permanent adhesive labels
are designed to stick and stay stuck, making removal difficult without leaving a residue.