Worth Data RF Terminal 7000 - Manual (Page 5)

Introduction
The 7001 RF Terminal is a low cost, easy-to-use radio frequency interactive terminal which communicates
with PCs (or any computer) by RS-232 serial port. This new terminal offers unprecedented power and ease
of use, while maintaining compatibility with programs written for the older Worth Data Terminals. The list
of fantastic features include:
• Low Cost
• Up to 3.3 mile range, LOS (10 x the competition)
• 64 Terminals per Base Station
• Spread Spectrum frequency hopping avoids interference
• No license required in USA and Canada
• Small size, (5.9" L, 3.6" W, 1.0" D) even with laser
• Certified to multiple 5 ft. drops to concrete
• Long Battery Life (15 hours of usage)
• Fast Recharging (2-3 hours) from External Power Supply
• No programming necessary on terminal
• Host communication through RS-232 Serial
• User Customizable Voice Prompting plus Display
• Backlit Color TFT Display Standard
• Uses Li-Ion battery
The RF Terminal maintains software compatibility with applications written for the older generation
T71/LT71 and T701/LT701 RF Terminals. Differences are noted below.
Differences
While the new 7000 series RF Terminals are fully software compatible with the older 70 and 700 series
terminals, there are a few differences between them. The differences between the older generation of Worth
Data RF Terminals and the generation referred to within this manual are:
• 64 Terminals per Base Station instead of 16. Valid Terminal IDs are 0-9, A-Z, a-z, - and =.
• Valid Channels are 0-5.
• Base Station parameters (Baud Rate, Parity, Security Code, etc) are not set through the Terminal, but rather
set with a Windows program.
• The maximum number of characters that can be sent to a Base Station by a host program is 1000 instead of
the old 247.