Worth Data RF Terminal 7000 - Manual (Page 44)

background for all lines. The total height of the lines will be (1x16)+(3x24)+(1x32)+(1x16)+(2x32)=200 pixels:
this is line 1
this is line 2
this is line 3
this is line 4
this is line 5
this is line 6
this is line 7
this is line 8
The active colors change whenever \cb is received in a prompt. The user default will be used to display all the
prompts unless \cb changes the colors. All prompts will start with the user default. The active colors from the
last prompt will NOT be carried over to the next prompt.
A typical “prompt” command sequence follows the format below:
0@n,m,o,data
where n
is the line number (1-4) you want the prompt displayed on
m
is the character position (1-20) where you want the
prompt displayed
o
is the character that determines whether the prompt is for
display only (0) or is waiting for data input (1) See the
table below for valid characters for this position.
data
is the data you want displayed