ZyXEL Communications P-2602HW(L) Series - Manual (Page 158)

P-2602H(W)(L)-DxA Series User’s Guide
158 Chapter 11 Voice
4 You can continue to add, listen to, or delete tones, or you can hang up the receiver when
you are done.
11.8.0.2 Listening to Custom Tones
Do the following to listen to a custom tone:
1 Pick up the phone and press “****” on your phone’s keypad and wait for the message
that says you are in the configuration menu.
2 Press a number from 1201~1208 followed by the “#” key to listen to the tone.
3 You can continue to add, listen to, or delete tones, or you can hang up the receiver when
you are done.
11.8.0.3 Deleting Custom Tones
Do the following to delete a custom tone:
1 Pick up the phone and press “****” on your phone’s keypad and wait for the message
that says you are in the configuration menu.
2 Press a number from 1301~1308 followed by the “#” key to delete the tone of your
choice. Press 14 followed by the “#” key if you wish to clear all your custom tones.
You can continue to add, listen to, or delete tones, or you can hang up the receiver when you
are done.
11.9 Advanced SIP Setup Screen
Click VoIP > SIP > SIP Settings to open the SIP Settings screen. Select a SIP account and
click Advanced Setup to open the Advanced SIP Setup screen. Use this screen to maintain
advanced settings for each SIP account.