ZyXEL Communications P-2602HW(L) Series - Manual (Page 301)

P-2602H(W)(L)-DxA Series User’s Guide
Chapter 25 Tools 301
C
H A P T E R
25
Tools
This chapter explains how to upload new firmware, manage configuration files and restart
your ZyXEL Device.
Note: Do not interrupt the file transfer process as this may PERMANENTLY
DAMAGE YOUR ZyXEL Device.
25.1 Introduction
Use the instructions in this chapter to change the device’s configuration file or upgrade its
firmware. After you configure your device, you can backup the configuration file to a
computer. That way if you later misconfigure the device, you can upload the backed up
configuration file to return to your previous settings. You can alternately upload the factory
default configuration file if you want to return the device to the original default settings. The
firmware determines the device’s available features and functionality. You can download new
firmware releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to upgrade
your device’s performance.
Note: Only use firmware for your device’s specific model. Refer to the label on the
bottom of your ZyXEL Device.
25.2 Filename Conventions
The configuration file (often called the romfile or rom-0) contains the factory default settings
in the menus such as password, DHCP Setup, TCP/IP Setup, etc. It arrives from ZyXEL with a
“rom” filename extension. Once you have customized the ZyXEL Device's settings, they can
be saved back to your computer under a filename of your choosing.
ZyNOS (ZyXEL Network Operating System sometimes referred to as the “ras” file) is the
system firmware and has a “bin” filename extension. Find this firmware at
www.zyxel.com.With many FTP and TFTP clients, the filenames are similar to those seen
next.
ftp> put firmware.bin ras
This is a sample FTP session showing the transfer of the computer file "firmware.bin" to the
ZyXEL Device.
ftp> get rom-0 config.cfg