ZyXEL Communications P-2602HW(L) Series - Manual (Page 134)

P-2602H(W)(L)-DxA Series User’s Guide
134 Chapter 9 Wireless LAN
Figure 69 Example: Wireless Client OTIST Screen
To start OTIST in the device, click Start in this screen.
Note: You must click Start in the ZyXEL Device and in the wireless device(s) within
three minutes of each other. You can start OTIST in the wireless devices and
the ZyXEL Device in any order.
After you click Start in the ZyXEL Device, the following screen appears (in the ZyXEL
Device).
Figure 70 OTIST: Settings
You can use the key in this screen to set up WPA-PSK encryption manually for non-OTIST
devices in the wireless network.
Review the settings, and click OK. The ZyXEL Device begins transferring OTIST settings.
The following screens appear in the ZyXEL Device and in the wireless devices.
Figure 71 OTIST: In Progress on the ZyXEL Device