ZyXEL Communications P-2602HW(L) Series - Manual (Page 101)

P-2602H(W)(L)-DxA Series User’s Guide
Chapter 7 WAN Setup 101
7.5.1 Advanced Internet Access Setup
To edit your ZyXEL Device's advanced WAN settings, click the Advanced Setup button in
the Internet Access Setup screen. The screen appears as shown.
Figure 49 Advanced Internet Access Setup
The following table describes the labels in this screen.
Cancel Click Cancel to begin configuring this screen afresh.
Advanced Setup Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
Table 26 Internet Access Setup (continued)
LABEL DESCRIPTION
Table 27 Advanced Internet Access Setup
LABEL DESCRIPTION
RIP & Multicast
Setup
RIP Direction Select the RIP direction from None, Both, In Only and Out Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The ZyXEL Device supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
ATM QoS
ATM QoS Type Select CBR (Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice
or data traffic. Select UBR (Unspecified Bit Rate) for applications that are non-time
sensitive, such as e-mail. Select VBR-RT (real-time Variable Bit Rate) type for
applications with bursty connections that require closely controlled delay and delay
variation. Select VBR-nRT (non real-time Variable Bit Rate) type for connections
that do not require closely controlled delay and delay variation.