Example: two subnets, Table 137 two subnets example table 138 subnet 1 – ZyXEL Communications P-2602HW(L) Series User Manual

Page 356

Advertising
background image

P-2602H(W)(L)-DxA Series User’s Guide

356

Appendix D IP Addresses and Subnetting

The first mask shown is the class “C” natural mask. Normally if no mask is specified it is
understood that the natural mask is being used.

Example: Two Subnets

As an example, you have a class “C” address 192.168.1.0 with subnet mask of 255.255.255.0.

The first three octets of the address make up the network number (class “C”).

To make two networks, divide the network 192.168.1.0 into two separate subnets by
converting one of the host ID bits of the IP address to a network number bit. The “borrowed”
host ID bit can be either “0” or “1” thus giving two subnets; 192.168.1.0 with mask
255.255.255.128 and 192.168.1.128 with mask 255.255.255.128.

Note: In the following charts, shaded/bolded last octet bit values indicate host ID bits

“borrowed” to make network ID bits. The number of “borrowed” host ID bits
determines the number of subnets you can have. The remaining number of
host ID bits (after “borrowing”) determines the number of hosts you can have
on each subnet.

255.255.255.240

/28

1111 0000

240

255.255.255.248

/29

1111 1000

248

255.255.255.252

/30

1111 1100

252

Table 136 Alternative Subnet Mask Notation (continued)

SUBNET MASK

SUBNET MASK “1” BITS

LAST OCTET BIT VALUE

DECIMAL

Table 137 Two Subnets Example

IP/SUBNET MASK

NETWORK NUMBER

HOST ID

IP Address

192.168.1.

0

IP Address (Binary)

11000000.10101000.00000001.

00000000

Subnet Mask

255.255.255.

0

Subnet Mask (Binary)

11111111.11111111.11111111.

00000000

Table 138 Subnet 1

IP/SUBNET MASK

NETWORK NUMBER

LAST OCTET BIT
VALUE

IP Address

192.168.1.

0

IP Address (Binary)

11000000.10101000.00000001.

00000000

Subnet Mask

255.255.255.

128

Subnet Mask (Binary)

11111111.11111111.11111111.

10000000

Advertising
This manual is related to the following products: