Xerox DocuColor 7000 EN - Manual (Page 108)

DocuColor 8000/7000 Operator Manual 3-34
3. Accessories
Stapling capacity for different paper types and weights
Following is the staple capacity for various types and weights of
paper.
* 221 to 300 g/m 2 paper, either coated or uncoated, cannot be
stapled. These weights will be stacked in the Top Tray.
KEY POINT:
The Offset Stacker/Stapler Tray may be limited to a
maximum of 50 staple sets. In order to avoid system shutdown or
jams, ensure that small staple set jobs do not exceed 50 sets.
Before you send a stapled-print job to the machine, enable the
offset jobs feature; this will improve tray capacity.
Unloading the HCSS80
To ensure consistent quality, unload sets of less than four sheets
and lighter weight paper after 50 sets are made, or when the curl
of the sets inhibits the ability of the sets to exit the HCSS80.
When the Stack Tray is full, Fault Code 112-550 appears in the
message display on the HCSS80. The digital press Touch Screen
displays a message, "Unload the Main Tray of the Finisher.”
The HCSS80 continues to stack sheets into the Stack Tray after
the message appears, but excess sheets may have a degraded
stacking quality. For best performance, unload the tray when
2,000 sheets have been stacked.
Paper Weight Coated Uncoated Mix Sizes
64–80 g/m 2 50 50 No
81–105g/m 2 42 42 No
106–135 g/m 2 31 31 No
136–186 g/m 2 26 26 No
187–220 g/m 2 18 18 No
221–300 g/m 2 No * No * No
Transparencies No No No