Xerox DocuColor 7000 EN - Manual (Page 81)

DocuColor 8000/7000 Operator Manual 3-7
3. Accessories
Paper trays air adjustment
Blowers help control the environmental conditions in the paper
trays to ensure optimum print capability:
• Each paper tray has two blowers. The lead edge blower is
on at all times and produces heated air if one of the
following selections are made: Coated paper,
Transparencies, or plain paper 106 g/m
2
or heavier. The
trail edge blower is on at all times and does not produce
heated air.
• The paper trays also have air adjustment levers on the
drawer to regulate the direction of the air. If the paper
weight is between 64 and 256 g/m
2 , the position of the air
adjust levers should be toward the front of the tray. If the
paper weight is between 257 and 300 g/m
2 , the position of
the air adjust levers should be positioned toward the rear
of the tray.
Slide the Air Adjustment Levers to accommodate the weight of the
paper loaded. Slide the lever forward for paper between 64 and
256 g/m
2
. For papers between 257 and 300 g/m
2
, slide levers
toward the back of the tray.