Xerox DocuColor 7000 EN - Manual (Page 61)

DocuColor 8000/7000 Operator Manual 2-5
2. Paper and paper trays
Paper guidelines
For the best results, remember the following:
•
Do not load paper or other materials above the
MAX
line on
the rear paper guide.
• Do not store extra reams of paper in the paper trays.
• Do not use wrinkled, torn, curled, or folded paper.
• Use the paper sizes and weights shown in the
Recommended
Materials List
.
• Follow the suggestions in the
Specialty Media Guide: Hints
and Tips
.
• Do not mix sizes or weights of paper in a paper tray.
• Ensure that the tray indicator LEDs are set for the correct
paper size, weight range, and paper type.
Copy paper is fed into the digital press in one of two positions:
long edge feed (LEF) or short edge feed (SEF). Long edge refers
to the long edge of the paper. When you see LEF, position the
paper so the long edge is fed first. Short edge refers to the short
edge of the paper. When you see SEF, position the paper so the
short edge is fed first.
NOTE: It is imperative that you load paper with the paper guides
adjusted properly. If the paper is NOT loaded properly, it skews
and jams occur.
SEF LEF