Xerox DocuColor 7000 EN - Manual (Page 69)

DocuColor 8000/7000 Operator Manual 2-13
2. Paper and paper trays
Loading paper
Use this procedure to load paper in any paper tray.
1. Pull out the tray slowly until it stops.
2. Load the correct size paper into the tray in the correct feeding
orientation. Refer to the orientation labels on each tray.
•
Load the paper seam side (the side on which the ream of
paper is sealed) up in all the trays.
• Do not load materials above the MAX line located on the
rear Edge Guide.
• Do not store extra reams of paper in the open area of the
paper trays. The tray will become inoperable until the
paper is removed.
NOTE: Many suppliers use arrows on the paper ream
labels to indicate the preferred side to image first. Use this
side (as indicated by the arrow) as equivalent to the seam
side when loading the paper.
3. Adjust the paper guides by pressing in the guide release and
carefully moving the Edge Guide until it lightly touches the
edge of the material in the tray.
4. Although all the trays have auto size detection capability, the
paper weight (g/m 2 ) range must be selected on the Weight
Indicator at the top/front of each tray.
•
Selecting the correct paper weight range affects the
throughput performance and image quality.