Xerox DocuColor 7000 EN - Manual (Page 95)

DocuColor 8000/7000 Operator Manual 3-21
3. Accessories
Clear Bypass area jam
Perform the following steps to clear the HCS80 jam in the Bypass
area and resume printing.
1. Remove any paper from the Top Tray.
2. Lift the HCS80
Top Cover
.
3. Lift the green handle, or handles, indicated on the UI and
remove all paper in the Bypass area. Remove paper only from
the areas indicated.
4. Close each green handle.
5. Close the HCS80
Top Cover.
6. If the UI indicates there is a jam in the digital press, follow the
instructions on the screen to remove any paper in the area
indicates. Refer to the
Jam Clearance
section in the
Problem
Solving
chapter in this manual.
7. Follow the instructions displayed on the digital press UI to
resume printing.