Loss of power, Loss of power -40 – Xerox DocuColor 7000 EN User Manual
Page 114
DocuColor 8000/7000 Operator Manual
3-40
3. Accessories
NOTE: To undock the HCSS from the digital press, reach into the
circular area near the bottom of the HCSS for the Undocking
Lever. Refer to the picture below.
Pull the lever toward you and hold it in position while moving the
HCSS a small distance (25.4mm, 1in.) away from the press.
Release the lever and continue to move the HCSS as far as
required.
Loss of Power
If power is interrupted to the HCSS80:
•
Ensure the power cord is plugged in to the proper wall
receptacle.
•
Ensure that the digital press power is on.
•
If the power has not been restored by the above procedure,
call Xerox Customer Support.
Also call your Xerox service representative if the loss of power to
the HCSS80 seems to be frequent or excessive.
Undocking
Lever inside
here