Paper specifications for stapling, Paper specifications for stapling -47 – Xerox DocuColor 7000 EN User Manual
Page 121
DocuColor 8000/7000 Operator Manual
3-47
3. Accessories
Paper specifications for stapling
The following chart shows the stapling details for paper size,
orientation, destination, and staple position. Numbers have been
rounded up or down.
TIP:
Paper that is larger than A3/11 x 17 inch cannot be stapled
or offset.
NOTE: Stapled sets of large paper (A3, 11 x 17in. and greater)
may stack slightly skewed. The stapled sets will be of high quality.
Staple Positions marked with an “O” may be
selected in the position indicated. Positions
marked with an “X” are not available for stapling.
X
Front Corner = Single Staple Position 1
Y
Rear Corner = Single Staple Position 2
Output
Destination
Staple Position
(Output fed to Stack Tray)
Output
Destination
Inches
MM
Sheet
Orientation
Stack Tray
64-220 g/m
2
Front
corner
X
Rear
corner
Y
Dual
Top Tray
64-300 g/m
2
(no stapling)
7.2 x 10.1
JIS B5 (182 x
257)
SEF
Yes
O
X
X
Yes
8.3 x 11.7
A4 (210 x 297)
SEF
Yes
O
O
X
Yes
8.5 x 11
216 x 279
SEF
Yes
O
O
X
Yes
8.5 x 13
216 x 330
SEF
Yes
O
O
X
Yes
8.5 x 14
216 x 356
SEF
Yes
O
O
X
Yes
10.1 x
14.3
JIS B4 (257 x
364)
SEF
Yes
O
X
X
Yes
11 x 17
279 x 432
SEF
Yes
O
X
O
Yes
11.7 x 16.5
A3 (297 x 420)
SEF
Yes
O
X
O
Yes
12 x 18
305 x 457
SEF
Yes
X
X
X
Yes
12.6 x
17.7
320 x 450
SEF
Yes
X
X
X
Yes
12.6 x
19.2
320 x 488
SEF
Yes
X
X
X
Yes
7.2 x 10.1
B5 (182 x 257)
LEF
Yes
O
X
X
Yes
8 x 10
203 x 254
LEF
Yes
O
X
X
Yes
8.3 x 11.7
A4 (210 x 297)
LEF
Yes
O
X
O
Yes
8.5 x 11
216 x 279
LEF
Yes
O
X
O
Yes
10.5 x
15.3
Kai 8 (267 x 388)
Asian market
size
SEF
Yes
O
X
X
Yes
10.5 x 7.6
Kai 16 (267 x
194) Asian
market size
LEF
Yes
O
X
X
Yes