Connecting the speakers, English prep ara tion, Silent digital 1 digital 2 analog dts – Yamaha TSS-10 User Manual
Page 11
9
English
PREP
ARA
TION
CONNECTIONS
CAUTIONS
• The SPEAKER OUTPUTS terminals on the rear of the amplifier unit are only designed for connection of the
supplied speakers. Never connect these terminals to an AV amplifier or a power amplifier, as it may cause
misoperation, fire and/or damage to this system.
• Secure the speaker cables so that they will not catch on hands or feet.
Connecting the speakers
Connect the speakers to the amplifier unit.
Connect the three speakers with a 3 m cable to the FRONT L, R and CENTER terminals. Connect the two speakers with
a 10 m cable to the REAR L and R terminals. Connect the subwoofer to the SUBWOOFER terminal.
Note
• Do not connect any speakers to the speaker terminals on the amplifier unit except for the supplied speakers.
1
2
DIGITAL
INPUTS
OPTICAL
SPEAKER
OUTPUTS
FRONT
REAR
(SURROUND)
CENTER
S. WOOFER
DC IN 15V
ANALOG
INPUTS
L
R
L
R
L
R
SILENT
DIGITAL 1
DIGITAL 2
ANALOG
DTS
INPUT
MODE
VOLUME
DIGITAL
7
6
5
4
3
2
1
+6
+4
+2
0
–2
–4
–6
TRIM
PL
MOVIE
PL
MUSIC
STANDBY/ON
Left front
speaker
Right front
speaker
Left rear
speaker
Right rear
speaker
Center
speaker
Subwoofer
Amplifier unit
Rear panel
TSS-10Eng(UB)a
02.7.31, 2:35 PM
9