Yamaha TSS-10 - Manual (Page 5)

3
English
PREP
ARA
TION
CONTROLS AND FUNCTIONS
1
INPUT and indicators
Press this button repeatedly to select an input source
between DIGITAL 1, DIGITAL 2 and ANALOG. The
current mode is shown by the lighting of the
corresponding indicator.
DIGITAL 1:
Select this to reproduce source signals received at the
DIGITAL INPUTS OPTICAL 1 terminal on the rear
panel.
DIGITAL 2:
Select this to reproduce source signals received at the
DIGITAL INPUTS OPTICAL 2 terminal on the rear
panel.
ANALOG:
Select this to reproduce source signals received at the
ANALOG INPUTS terminals on the rear panel.
2
MODE (k/n) and indicators
Press this button (or k / n ) repeatedly to select the desired
surround mode among DTS, DIGITAL, PLII
MOVIE, PLII MUSIC and “off”. The current mode is
shown by the lighting of the corresponding indicator.
* If a DTS or Dolby Digital encoded signal is inputted when
DTS or
DIGITAL mode is not selected, the
corresponding indicator lights up dimly.
Refer to page 13 for details on each surround modes.
SILENT
DIGITAL 1
DIGITAL 2
ANALOG
DTS
INPUT
MODE
VOLUME
DIGITAL
7
6
5
4
3
2
1
+6
+4
+2
0
–2
–4
–6
TRIM
PL MOVIE
PL MUSIC
STANDBY/ON
6 5
2
4
3
1
INPUT
MODE
REAR
MUTE TEST
S.WOOFER
VOLUME
1
2
7
8
3
9
5
0
Front panel Remote control
TSS-10Eng(UB)a 02.7.31, 2:35 PM 3