Yamaha TSS-10 - Manual (Page 19)

17
English
APPENDIX
Amplifier unit
Output Power per Channel
Front/center/rear: 6W (1 kHz, 4 Ω , 10% THD)
Subwoofer: 18W (100 Hz, 4 Ω , 10% THD)
Input Sensitivity .................................................. 200 mV
Headphone Jack Output Level/Output Impedance
......................................... 450 mV/30 Ω (1 kHz, 200 mV)
Frequency Response ............................... 40 Hz–20 kHz
Dimensions (W ן H ן D)
......................................... 96 mm ן 281 mm ן 208 mm
(3-3/4” ן 11-1/16” ן 8-3/16”)
Weight ..................................................... 1.6 kg (3.5 lbs.)
Power Consumption ............................................... 40 W
Standby Power Consumption .................... Approx. 1 W
Front/center/rear speakers
Type ........................................ Full range speaker system
Acoustic suspension
Driver ..................................... 5 cm (2”) spruce cone type
Magnetic shielding type
Impedance .................................................................. 4 Ω
Dimensions (W x H x D) ... 70 mm ן 95 mm ן 118 mm
(2-3/4” ן 3-3/4” ן 4-5/8”)
Weight ..................................................... 0.4 kg (0.9 lbs.)
Subwoofer
Type ............ Active Servo Processing Subwoofer System
Driver .......................................... 13 cm (5”) cone woofer
Magnetic shielding type
Impedance .................................................................. 4 Ω
Dimensions (W x H x D)
.......................................... 220 mm x 224 mm x 222 mm
(8-11/16” ן 8-13/16” ן 8-3/4”)
Weight ..................................................... 3.3 kg (7.3 lbs.)
* Please note that all specifications are subject to change
without notice.
SPECIFICATIONS
TSS-10Eng(UB)a 02.7.31, 2:35 PM 17