Yamaha TSS-10 - Manual (Page 12)

10
CONNECTIONS
1
2
CENTER
S. WOOFER
DC IN 15V
ANALOG
INPUTS
L
R
SILENT
DIGITAL 1
DIGITAL 2
ANALOG
DTS
INPUT
MODE
VOLUME
DIGITAL
7
6
5
4
3
2
1
+6
+4
+2
0
–2
–4
–6
TRIM
PL MOVIE
PL MUSIC
STANDBY/ON
Once all connections have been made, check them one
more time. Finally, plug in the amplifier unit to the wall
outlet in the following procedure.
1. Connect the included AC adaptor to the amplifier
unit.
2. Connect the included power cable to the AC adaptor.
3. Insert the plug of the power cable into the wall outlet.
Notes
• Disconnect the power cable if you will not use this system for
an extended period.
• When placing the included AC adaptor on the rack, etc., be sure
to fix the adaptor on the rack, etc. to prevent it from falling. If
the adaptor falls, it may cause personal injury or damage to the
adaptor and/or other equipment.
• Do not connect the included AC adaptor to any unit other than
the amplifier unit of this system.
To AC outlet
Amplifier unit
Connecting the power cable
Rear panel
AC adaptor
(included)
Power cable
(U.S.A. model)
(included)
TSS-10Eng(UB)a 02.7.31, 2:35 PM 10