Yamaha RX-Z7 - Manual (Page 103)

103
En
Graphical user interface (GUI) menu
AD
V
ANCED
OPERA
T
ION
Use this menu to set the functions of the multi-zone
configuration.
■ Zone SP Assign
(Zone speaker assignment)
Use this feature to assign the speaker terminals for Zone 2
and Zone 3.
If you want use the external amplifiers for the all channels in the
main zone, you can use all the speaker terminals of this unit for
Zone 2 and/or Zone3 (pre-amplifier mode). Set “PREAMP
MODE” in “ADVANCED SETUP” to “ON” (page 131).
1
Press 9k / n to select the speaker terminal
and then press 9l / h repeatedly to select
the desired zone of which you want to use
the speakers.
M : Main zone
2 : Zone 2
3 : Zone 3
2
Press 9k / n to select “OK” and then press
9
ENTER to confirm the setting.
y
• To return to the previous menu level without change,
select “CANCEL” in step 2.
■ Component Assign
(Component assignment)
Use this feature to assign the COMPONENT VIDEO
(MONITOR OUT/ZONE OUT) jacks to the main zone or
another zone. Video signals are directed to the video
monitor in the selected zone if the corresponding input
source is selected.
• The video conversion function does not work for the
COMPONENT VIDEO (MONITOR OUT/ZONE OUT) jacks
if “Component Assign” is set to “Zone2”, “Zone3”, or “Zone4”.
• The COMPONENT VIDEO (MONITOR OUT/ZONE OUT)
jacks do not output OSD signals.
■ Party Mode Set (Party mode settings)
The party mode enables you to play the same source in
multiple zones simultaneously (page 129). Use this
feature to enable or disable the party mode in each zone.
Target: Zone2/Target: Zone3/Target: Zone4
(Party mode target zone setting)
■ Zone2 Set/Zone3 Set
(Zone 2/Zone 3 settings)
Zone2 Volume/Zone3 Volume
(Zone 2/Zone 3 volume)
Use this menu to select whether this unit controls the
volume level of the audio signals output at the ZONE
OUT (ZONE 2 or ZONE 3) jacks.
Setup (Multi Zone)
Note
Choice Functions
Main Select this setting when you want to connect the
video monitor in the main zone to the
COMPONENT VIDEO (MONITOR OUT/
ZONE OUT) jacks.
Zone2 Select this setting when you want to connect the
video monitor in the Zone 2 to the
COMPONENT VIDEO (MONITOR OUT/
ZONE OUT) jacks.
SP1
SP2
M 2 3
Zone :
SP Terminal :
– 2 3
OK CANCEL
Zone4 Set
Zone OSD
Zone SP Assign
Component Assign
Party Mode Set
Zone3 Select this setting when you want to connect the
video monitor in the Zone 3 to the
COMPONENT VIDEO (MONITOR OUT/
ZONE OUT) jacks.
Zone4 Select this setting when you want to connect the
video monitor in the Zone 4 to the
COMPONENT VIDEO (MONITOR OUT/
ZONE OUT) jacks.
Notes
Choice Descriptions
Disable Select this setting to exclude the selected zone
from the party mode coverage. You can select
the input source of the selected zone
independently even if this unit is in the party
mode.
Enable Select this setting to include the selected zone to
the party mode coverage.
Choice Descriptions
Fixed Select this setting when you want to control the
volume level of the selected zone on the external
amplifier. This unit fixes the ZONE OUT
(ZONE 2 or ZONE 3) volume level to a standard
line level.
Variable Select this setting when you want to control the
volume level of the selected zone on this unit.
You can adjust the ZONE OUT (ZONE 2 or
ZONE 3) volume level simultaneously with
JVOLUME +/– on the remote control.