Yamaha RX-Z7 - Manual (Page 69)

69
En
SIRIUS Satellite Radio™ tuning
BA
S
IC
OPERA
T
ION
You can use the Parental Lock feature to limit the access
to the desired SIRIUS Satellite channels. This unit
automatically skips the locked channels when this unit is
in the All Channel Search mode or Category Search mode
and you search a channel by pressing
EPRESET/
TUNING/CH l / h (or 9PRESET/CH k / n).
■ Setting the code number and the locking
channels
Use this feature to set the Parental Lock code number
(PIN) and select the channels to be locked.
1
Set the operation mode selector to F
AMP
on the remote control and then press
I
MENU to display the GUI menu.
y
If the menu directory other than “Top Menu” (page 84) is
displayed, press and hold IMENU to display the top GUI
menu.
2
Press 9k / n repeatedly to select “Input
Select” and then press 9h.
3
Press 9k / n repeatedly to select the SIRIUS
Satellite Radio icon and then press
?
SUBMENU.
4
Press 9n to select “Parental Lock” and then
9
ENTER.
The following screen appears.
y
If the Parental Lock code number is already set, “PIN ----”
appears instead of “NEW PIN 0000”.
5
Use 9k / n / l / h to enter the desired 4-
digit code number.
• To select a number, press 9k / n.
• To move the digit position, press 9l / h.
y
If the Parental Lock code number is already set, enter it.
6
Press 9
ENTER to confirm the code number.
The SIRIUS Satellite Radio channel list screen
appears.
7
Press 9k / n repeatedly to select the desired
channel category and then press 9
ENTER.
The SIRIUS Satellite Radio channel list screen
appears.
In the SIRIUS Satellite Radio channel list screen, this unit
outputs the sound of the selected channel even if the
channel is locked.
8
Press 9k / n repeatedly to select the
channel you want to lock and then press
9
ENTER.
Check mark appears before the locked channel.
y
When you select the locked channel and press 9ENTER,
this unit unlocks the selected channel.
9
Repeat steps 7 and 8 to lock or unlock
another channel.
y
To switch between the category list screen and channel list
screen, press 9k / n / l / h to select “CAT” or
“CHAN” and then press 9ENTER.
10
Press 9k / n / l / h to select “EXIT” and
then press 9
ENTER.
11
Press I
MENU to turn off the GUI menu.
This unit is tuned into the last channel you select in
the “Parental Lock” screen. If the channel is locked,
this unit is tuned into “184 SIRIUS Weather &
Emergency” or “000 Sirius ID”.
y
• If you forget or want to change the Parental lock code number,
use “SIRIUS PIN” (page 131) to reset the Parental Lock code
number.
• Selecting “ALL” in “INITIALIZE” (page 131) will cancel all
parental locks.
■ Tuning into the locked channels
You can tune into the locked channels by the Direct
number access mode or preset tuning mode. When you
tune into the locked channel, following message appears
in the front panel display. Enter the code number you set
for the Parental Lock feature by using the numeric buttons
(B) or press NENT to cancel the tuning.
Setting the Parental Lock
Parental Lock
NEW PIN
0 0 0 0
Apply:ENTER
Note
0 1 8 L O C K E D
P I N : _ _ _ _
Channel number