Yamaha RX-Z7 - Manual (Page 106)

106
En
Graphical user interface (GUI) menu
The short message display (except some status messages) does
not appear when the component video signals with 720p, 1080i
or 1080p resolutions are input.
Playback Screen (Playback screen display time)
Use this feature to set the playback screen display time.
y
This setting is applied to the GUI screen in the main zone and
OSD in Zone 2, Zone 3, or Zone 4.
Position (GUI screen position)
Use this feature to adjust the vertical and horizontal
position of the GUI screen.
Control range: –5 (downward/left) to +5 (upward/right)
Wall Paper (Wall paper)
Use this feature to display the wall paper or gray
background in your video monitor when there is no video
signal being input.
■ iPod (iPod settings)
Standby Charge
(iPod charge on the standby mode)
Use this feature to select whether this unit charges the
battery of the stationed iPod or not when this unit is in the
standby mode.
■ Initial Set (Initial settings)
Audio Select (Default audio input jack select)
Use this feature to designate the default audio input jack
select setting (page 43) for the input sources connected to
the DIGITAL INPUT jacks when you turn on the power of
this unit.
Decoder Mode (Default decoder mode)
Use this feature to designate the default decoder mode
(page 53) for the input sources when you turn on the
power of this unit.
EXTD Surround (Default extended surround
decoder mode setting)
Use this feature to designate the extended surround
decoder mode (page 54) for the input sources connected to
the DIGITAL INPUT jacks when you turn on the power of
this unit.
Note
Choice Functions
Always Displays the menu unceasingly during an
operation.
10sec Turns off the menu 10 seconds after you
perform a certain operation.
30sec Turns off the menu 30 seconds after you
perform a certain operation.
Button Moving direction of the GUI display
9 k Up
9 n Down
9 h Right
9 l Left
Choice Functions
None Does not display any background in your video
monitor.
Piano Displays a background image (the photograph
of a piano) in your monitor when there is no
video signal being input.
Horn Displays a background image (the photograph
of a horn) in your monitor when there is no
video signal being input.
Electric Guitar Displays a background image (the photograph
of an electric guitar) in your monitor when there
is no video signal being input.
Gray Display a gray background in your monitor
when there is no video signal being input.
Choice Functions
Auto Charges the battery of the stationed iPod when
this unit is turned on and in the standby mode.
Off Charges the battery of the stationed iPod only
when this unit is turned on.
Choice Functions
Auto Automatically detects the type of audio input
signals and selects the appropriate audio input
jack select setting.
Last Automatically selects the last audio input jack
select setting used for the connected input
source.
Choice Functions
Auto Automatically detects the type of input signals
and select the appropriate decoder mode setting.
Last Automatically selects the last decoder mode
setting used for the connected input source.
Choice Functions
Auto Automatically detects the input digital audio
signals and activates the appropriate decoder.
Last Selects the last selected extended surround
decoder mode.