Yamaha RX-Z7 - Manual (Page 109)

109
En
Saving and recalling the system settings (System Memory)
AD
V
ANCED
OPERA
T
ION
3
Press 9k / n repeatedly to select the desired
memory number and then press 9h.
4
Press 9k / n / l / h to select a character or
function and then press 9
ENTER to
confirm the selection.
Repeat step 4 until you input a name you want to use.
5
Press 9k / n / l / h to select “SAVE” and
then press 9
ENTER.
y
• To reset the name, select “RESET” and then press 9ENTER.
• To cancel the operation without change, select “CANCEL” and
then press 9ENTER.
6
Press I
MENU to turn off the GUI menu.
If you change the language setting (page 107) or 132), names of
the memory settings will be automatically reset.
■ Parameters to be saved
The parameter groups indicated in bold are selected by
default.
Main zone parameters
Zone 2, Zone 3 and Zone 4 parameters
For zone 4, only the input source setting is saved.
If you load the system settings, the settings currently configured
are overwritten. If you do not want to erase the current settings,
save the settings using the System Memory feature in advance.
■ Loading by the 7SYSTEM MEMORY
buttons
You can recall the system settings stored in “Memory1” to
“Memory4” by pressing the corresponding 7SYSTEM
MEMORY buttons.
Note
Group Parameters Page
Input/HDMI
Out Audio Select 90
Decoder Mode 90
Input source 42
HDMI OUT SEL 43
Audio Stereo/Surround 85
PURE DIRECT on/off 54
EXTD SUR. setting 54
Adaptive DRC 95
Adaptive DSP Level 95
LFE Level 96
Dynamic Range 96
Tone Control 97
Pure Direct 98
CINEMA DSP 3D mode on/off 52
Volume Volume level 42
SP Config Parametric EQ 96
Configuration 93
Distance 94
Level 94
Information (Auto Setup) 40
Setup Menu (Auto Setup) 35
Video/
Display Set Analog ` Analog 99
Analog ` HDMI 99
HDMI ` HDMI 99
Processing 99
Short Message 105
Playback Screen 106
Position 106
Wall Paper 106
Others Lipsync 98
Front Panel Display 105
Audio Output 101
Parameter Descriptions Page
Input Input source 127
Volume Volume level 127
Tone Control Tone control settings 128
Note
Loading the system settings
Note
Group Parameters Page