Yamaha RX-Z7 User Manual

Page 80

Advertising
background image

80

En

Using USB and network features

2

Press 0

MEMORY.

The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.

y

• To store the selected content under an empty preset number

automatically, press and hold 0MEMORY for more than 2
seconds instead of step 2. In this case, the following steps are
unnecessary.

• To cancel the preset, press 0MEMORY again.
• When you do not complete each of the following steps within

30 seconds, the memory preset mode is automatically canceled.
In this case, start over from step 2.

3

Press a numeric button (1-8) (B) that you
want to assign.

y

If you select a preset number being used (“*” appears next to
the preset number), the current preset number will be
overwritten.

4

Press

D

ENTER (or 9ENTER).

The preset content is set and the PRESET indicator
disappears.

Select an item by using numeric buttons

(1-8) (B)

Press one of the numeric button (1-8) (B) to
which the desired item is assigned to select the
item as the input source.

This unit starts the playback of the source assigned to
the selected numeric button.

• “Empty Memory!” appears in the front panel display and

the short message display when you press the numeric
button (1-8) (B) to which no items are assigned.

• This unit does not recall the correct item assigned to the

selected numeric button (1-8) (B) in the following cases:
– the connected USB device is incorrect.
– the PC or MCX-2000 which stores the selected item is

turned off or disconnected from the network.

– the selected Internet Radio station or Rhapsody

®

service

is temporary unavailable or out of service.

– the directory of the selected item has been changed.

y

This unit stores the relative position of the preset items in a
directory or playlist, and does not recall the correct item
by using numeric buttons (1-8) (B) if you add or delete
music files to or from the same directory or playlist as the
preset items. In such cases, preset the desired item to the
numeric buttons (1-8) (B) again.
We recommend the following methods:

USB storage devices
Create eight directories which contain the desired items in a
directory beside the directory which contains all music files,
and then preset the top item of each directory to the numeric
buttons (1-8) (B). When you change the items which are
preset to the numeric buttons (1-8) (B), replace the items in
the directory to the desired items without deleting the
directory.

PC server/MCX-2000
Create eight playlists which contain the desired items, and
then preset the top item of each playlist to the numeric
buttons (1-8) (B). When you change the items which are
preset to the numeric buttons (1-8) (B), replace the
registered items in the playlist with the desired items
without deleting the playlist.

MEMORY

PRESET

M e m o r y 1

U S B

Lights up

MEMORY

PRESET

M e m o r y 7

U S B

Preset number

Notes

Advertising