Xantrex Technology 200 - Manual (Page 21)

XPower Powerpack Features
975-0057-01-01 2-3
Control Panel Operation
5 Charging Status light illuminates when the
XPower Powerpack is in Charging Status mode
(i.e. AC Charger is connected to the inverter’s
Charger Input Socket and plugged into the
household 120 V AC outlet).
6 Battery Charge % light illuminates (green) when
Battery Charge information is displayed on the
Digital Display.
7 Output Power (W) light illuminates (green) when
Output Power information is displayed on the
Digital Display.
8 Display Function button, when pressed, allows for
reading Battery Charge status on the Digital
Display. Toggles Digital Display’s power ON/OFF.
Not
shown
Audible Alarm (inside the unit) sounds in the event
of overheating or low battery protection on inverter.
How to...
Required
Condition
Required Action Note
Monitor total
AC power
consumed by
the
applications
powered from
the
Powerpack’s 2
AC outlets Inverter’s ON/OFF
switch is turned ON;
Output Power (W)
light illuminates
(green);
AC charger is
unplugged from the
wall AC outlet. No action required.
The Digital Display
will show the AC
power drawn from the
inverter by the
applications powered
from the Powerpack’s
AC outlets. In order to save the
battery power and
ensure longer inverter
run time, press Display
Function button to turn
off the Digital Display.
Press Display Function
button again to turn the
display On for AC
power reading.
Feature Description