Xantrex Technology 200 - Manual (Page 64)

Troubleshooting
5-6 975-0057-01-01
The engine
being jump-
started will not
start. XPower Powerpack
battery is not fully
charged.
The engine condition
is poor.
External fuse (250 A)
is blown.
The engine start
capacity exceeds the
XPower Powerpack
jump-start capability.
Recharge the XPower Powerpack
battery.
Have the engine serviced.
Replace 250 A, 32 V fuse with same
type and ratings.
The battery
clamps of the
jump-start
cables measure
zero volts. External fuse (250 A)
is blown. Replace 250 A, 32 V fuse with same
type and ratings.
The light does
not turn on. Light bulb has burnt
out. Remove lens cover and replace bulb
with one of the same type and rating.
Table 5-1 Troubleshooting reference
Problem Possible Cause Solution