Over-temperature safety protection, Over-temperature safety protection –13, Warning: fire hazard – Xantrex Technology 200 User Manual

Page 39

Advertising
background image

Using the Air Compressor: XPower Powerpack 400 Plus

975-0057-01-01

3-13

Over-Temperature Safety Protection

It is recommended that you follow the warnings and turn the

compressor off for 10 minutes after every 10 minutes of

operation. However, the

XPower Powerpack 400 Plus

is

equipped with an over-temperature safety protection feature

that automatically turns the compressor off if it begins to

overheat. Once the compressor cools down to its normal

operating temperature it will automatically turn on again and

continue inflating. You should turn the compressor off at the

power switch if this safety feature engages, and allow the

compressor to cool for 15 minutes before re-starting.

WARNING: Fire Hazard

Do not leave the compressor unattended while in
operation. Keep out of reach of children.

WARNING: Risk of personal injury or
damage to equipment

Never leave the compressor unattended while in
operation. The compressor is capable of inflating to
250 PSI. Do not exceed the recommended pressure
of either the compressor or the object being
inflated. If either recommended pressure is
exceeded, an explosion may result.

Advertising