Xantrex Technology 200 - Manual (Page 22)

Features
2-4 975-0057-01-01
Monitor
Battery
Charging
status Inverter’s ON/OFF
switch is turned to
OFF;
All appliances must be
disconnected from the
AC and DC power
outlets;
The ON/OFF switch
of the incandescent
light must be turned to
OFF;
The AC charger must
be plugged into the
Powerpack’s Charger
Input Socket and also
in to a household AC
outlet. No action required.
A flashing green
Charging Status
light indicates that the
Powerpack’s battery
needs recharging and
that the AC charger is
charging the battery.
A steady green
Charging Status
light indicates that the
Powerpack’s battery
is fully charged and
the Powerpack is
ready for use.
Recharging with the
supplied AC charger is
a true “plug-in-and-
forget” charging
method.
We recommend leaving
the AC charger
connected when the
Powerpack is not in use
to permanently
maintain the battery in
fully charged condition.
Check Battery
Charge status Inverter’s ON/OFF
switch is turned to
OFF;
All appliances must be
disconnected from the
AC and DC power
outlets;
The ON/OFF switch
of the incandescent
light must be turned to
OFF;
The AC charger must
not be plugged into
the Powerpack’s
Charger Input Socket. Push and hold the
Display Function
button.
The green Battery
Charge (%) light will
come on and the
Digital Display will
show the remaining
battery capacity in %.
This function is
disabled when the AC
charger is plugged in to
the Charger Input
Socket, or when the
inverter main switch is
ON.
For accurate Battery
Charge reading, allow
15 minutes between
charging/use and
battery capacity check.
How to...
Required
Condition
Required Action Note