Xantrex Technology 200 - Manual (Page 55)

Replacing the Internal Battery
975-0057-01-01 4-9
Before attempting to replace the internal battery, make sure
you:
•
Disconnect any charging cables, 12 V DC appliances,
and AC appliances from the
XPower Powerpack .
• Turn off the AC Outlet On/Off switch and turn off the
light switch.
• Remove the jump-start cables.
To replace the battery:
1. Place the
XPower Powerpack upright on a stable, level
surface.
2. On the XPower Powerpack , unscrew the four fasteners
on the battery cover. Place the fasteners in the cover for
safe keeping.
WARNING
If you do not know how to safely remove and install
batteries, have this task performed by a qualified
service technician.
WARNING: Fire hazard
When installing the replacement battery, make sure
the battery polarity is correct. Reverse polarity will
damage the
XPower Powerpack and could cause
serious injury.