Using the air compressor – Xantrex Technology 200 User Manual
Page 38
Operation
3-12
975-0057-01-01
8. Remove the red positive (+) clip and then the black
negative (–) clip from the vehicle’s battery terminal.
9. Remove the cables from the Jump-Start Cable Port.
Using the Air Compressor:
XPower
Powerpack 400 Plus
WARNING: Fire hazard
The jump-start feature is designed for short term
operation only—less than 4 seconds. Operating the
jump-start feature for more than 4 seconds may
cause damage to the unit. Allow the
XPower
Powerpack
to cool down for at least 3 minutes after
each jump-start.
Important:
Recharge the
XPower Powerpack
as soon as
possible after each use. See
Powerpack Battery” on page 4–2
WARNING: Fire Hazard
The compressor is designed for short term
operation only.
Operating the compressor over an extended period
of time will cause the compressor unit to overheat
which could lead to fire. Allow the compressor to
cool down for 10 minutes after each 10 minutes of
continuous operation.