ZyXEL Communications PRESTIGE 128MH - Manual (Page 106)

Prestige 128MH PSTN Router/Hub
6-6 Remote Node IPX Configuration
The following Table 6-1 describes the Novell IPX Ethernet Setup Menu.
Table 6-1. Novell IPX Ethernet Setup Fields
Field Description Options
Seed Router Determine if your Prestige is to act as a seed router. [Yes/No]
Frame Type Enable/Disable the individual frame type. Remember to enable only
the ones that are actually used on your network. [802.2]
[802.3]
[Ethernet II]
[SNAP]
IPX Network
# If your Prestige is a seed router, enter a unique network number for
each frame type enabled.
Press [Enter] at the message [Press ENTER to Confirm ...] to save your configuration, or press [Esc] at
any time to cancel.