ZyXEL Communications PRESTIGE 128MH User Manual

Page 125

Advertising
background image

Prestige 128MH PSTN Router/Hub

Dial-In Server Configuration

8-7

Table 8-2.

Default Dial-in Setup Fields (continued)

Field

Description

Option

Dial-In IPX Net. Num.
Supplied By: IPX Pool

This field tells your Prestige to provide the remote host with an
IPX network number from the pool. Otherwise, your Prestige
will generate a random IPX network number.

[Yes/No]

(Default = No)

IPX Start Net. Num.

This field is applicable only if you selected [Yes] in the Dial-In
IPX Net. Num. Supplied By: IPX Pool field. The IPX pool
contains contiguous IPX network numbers and this field
specifies the first one in the pool.

IPX Count (1,16)

Enter the number ([1] - [16]) of network numbers in the IPX
Pool. For example, if the starting number is 12345678, and the
count is [2], then the IPX pool will have 12345678 and
12345679.

[1] to [16]

Session Options:

Input Filter Sets

Output Filter Sets

Enter the filter set(s) to apply to the incoming and outgoing
traffic between your Prestige and the remote dial-in user. Keep
in mind that the filter set(s) will only apply to remote dial-in
users but not the remote nodes.

You can choose from 12 different filter sets. In addition, you
can link up to 4 filter sets together for further customization (for
example, 1, 5, 9, 12).

Note that spaces and [-] symbol, are accepted in this field. For
more information on customizing your filter sets, see Chapter 9
- Filter Configuration
. The default is blank, i.e., no filters.

Default = blank

Session Options:

Idle Timeout

This value is the number of idle seconds that elapses before
the dial-in user is automatically disconnected when the Prestige
is calling back. Idle The idle timer is reset whenever there is
traffic from the Prestige.

This field will only be used when calling back; otherwise, the
idle timeout is governed by the caller.

Once you have completed filling in Menu 13 - Default Dial-in Setup, press [Enter] at the message [Press
ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

Advertising