ZyXEL Communications PRESTIGE 128MH - Manual (Page 32)

Prestige 128MH PSTN Router/Hub
2-2 Hardward Installation & Initial Setup
2.2 Additional Installation Requirements
In addition to the contents of your package, there are other hardware and software requirements
you need before you can install and use your Prestige. These requirements include:
l A computer with Ethernet 10Base-T NIC (Network Interface Card).
l A computer equipped with communications software configured to the following parameters:
Ø VT100 terminal emulation.
Ø 9600 Baud.
Ø No parity, 8 Data bits, 1 Stop bit.
l An (optional) external modems or ISDN TA.
After the Prestige is properly set up, you can make future changes to the configuration through
telnet connections.