6 changing the system password – ZyXEL Communications PRESTIGE 128MH User Manual
Page 42
Prestige 128MH PSTN Router/Hub
2-12
Hardward Installation & Initial Setup
21
Filter Set Configuration
Use this menu to setup filters to provide security, call control, etc.
22
SNMP Configuration
Use this menu to setup SNMP related parameters
23
System Security
Use this menu to setup security related parameters.
24
System Maintenance
This menu provides system status, diagnostics, firmware upload, etc.
99
Exit
To exit from SMT and return to the blank screen.
2.6 Changing the System Password
The first thing your should do before anything else is to change the default system password by
following the steps below.
Step 1.
Select option [23. System Security] in the Main Menu. This will open Menu 23 -
System Security as shown in Figure 2-5.
Figure 2-5.
Menu 23 - System Security
Step 2.
From the System Security Menu, select option [1. Change Password] to open Menu
23.1 - System Security - Change Password.
Menu 23 - System Security
1. Change Password
2. External Server
Enter Menu Select ion Number: 1