ZyXEL Communications PRESTIGE 128MH - Manual (Page 70)

Prestige 128MH PSTN Router/Hub
3-14 Internet Access
Table 3-5. Single User Account Menu Fields
Field Description
Single User Account Select [Yes] to enable SUA.
Local IP Addr. If your ISP did not assign you a static IP address, enter [0.0.0.0] here;
otherwise, enter that IP address here.
Server IP Addr. If you want to make a single server accessible to outside users, enter that
server's IP address here; otherwise, enter 0.0.0.0 in this field
Press [Enter] at the message [Press ENTER to Confirm ...] to save your configuration, or press [Esc]
at any time to cancel.
At this point, your Prestige will ask if you wish to test the Internet connection. If you select [Yes],
the Prestige will call the ISP and test the configuration. If the test fails, note the error messages
on the screen and take the appropriate troubleshooting steps.
3.6 Configuring Backup ISP Accounts
If you have more than one ISP account, you can configure the secondary ISP as a backup. You
can switch to the backup ISP in the event that the primary ISP is out of service. The SUA feature
can be enabled for all these accounts.
3.6.1 Configure a Backup ISP
To configure a backup ISP Account, follow these steps:
Step 1. Configure your primary ISP using Menu 4, as described earlier in this chapter.
Step 2. Enter Menu 11, then select an unused remote node.
Step 3. In Menu 11.1, choose a name for your backup ISP account, then set the Active field to
[No], and enter your outgoing login name, password, and phone number(s). The
Remote IP Address field should be set to [1.1.1.1].