ZyXEL Communications PRESTIGE 128MH User Manual
Page 65
Prestige 128MH PSTN Router/Hub
Internet Access
3-9
Table 3-4 contains instructions on how to configure your Prestige for Internet access.
Table 3-4.
Internet Access Setup Menu Fields
Field
Description
Observation
ISP's Name
Enter the name of your Internet Service Provider. (This information
is for identification purposes only.)
Myisp
ISP IP Addr
Enter the IP Address of the remote gateway at the ISP's site. If you
do not have this data, just leave it blank.
(optional)
Connection Type
Select [Switch] if you connect to your ISP via a dial-up line. Select
[Leased] if through a leased line.
Space-bar to
toggle
[Switch/Leased]
Leased Ports
If [Leased] is selected in Connection Type, this field shows the
WAN port. It shows N/A if the WAN port is not a leased line port.
[1 (r.o.)]
Pri(mary) Phone #
The first number your Prestige will dial to connect to the ISP if it is
a dial-up line.
(required)
Sec(ondary) Phone
#
If the Primary Phone number is busy or does not answer, your
Prestige will call the Secondary Phone number if available.
(optional)
My Login Name
Enter the login name assigned to you by your ISP.
(required)
My Password
Enter the password associated with the login name above. Note
that this login name/password pair is only for your Prestige to
connect to the ISP's gateway. For TCP/IP applications, e.g., FTP,
you will need a separate login name and password for each
server.
(required)