ZyXEL Communications PRESTIGE 128MH - Manual (Page 46)

Prestige 128MH PSTN Router/Hub
2-16 Hardward Installation & Initial Setup
2.8 WAN Port Setup
This section describes how to configure the built-in modems and the WAN port on your Prestige
using Menu 2- WAN Setup. We will use the term “WAN device” to mean either the built-in
modems or the external modem/TA on the WAN port from now on.
Select a WAN port (modem 1, 2 or the WAN port) that you wish to configure first. Then
configure the WAN port from Submenu 2.1. If advanced setup is required, go into Menu 2.2.
Your Prestige will use this information to initialize the port and the attached WAN device.
2.8.1 Prestige 128MH WAN Port Setup
To configure a WAN port on Prestige 128MH, follow these steps:
Step 1. Select option [2. WAN Setup] in the Main Menu by typing 2 at the menu selection
number prompt.
Step 2. In Menu 2 - WAN Port Setup, as shown in Figure 2-8, enter the number (1, 2 or 3) of
the WAN port you wish to configure.