Edimax Technology PS-1206UWg - Manual (Page 26)

21
If you have just installed another new print server in the
network, you must run this program first. This program will
search for new print servers and allow you to add the new
network printer port into client
’s computer conveniently.
Perform the standard Add Printer procedure, then you can
print directly to the printer through the newly installed print
server.
Please be aware that Network Ports Quick Setup Utility can
only detect and configure all print servers on the same
network, it cannot search and configure print servers on
other subnets across network segments. You must use
Remote Ports Utility described in the next section to
manage remote (across network segments) print servers.
3.5.2 Rem ote Por ts (Utilit y)
Remote Ports Utility offers a convenient way for you to
manage and add printer port of the remote print server.
From the assistant of this utility, you can print to other print
servers outside the subnet across network segment.
However, please note that this function only supports
TCP/IP network protocol.
Please follow the procedures described below:
Step1. Run Remote Ports Utility. Clicks
“Add” to add a
remote print port.