Edimax Technology PS-1206UWg - Manual (Page 56)

51
In the Infrastructure mode, you have to let the print server
associate with an access point. You let the print server
scan for an available access point automatically or
manually assign the SSID of the access point you want to
use.
If you select to let the print server scan for an available
access point, the following window will pop up.
The list is the scanned available access points. Select an
access point in the list and click
“Next”. If you cannot find
the access point that you want to use, click
“Scan” to let
the print server scan again.
Ad Hoc Mode: