Edimax Technology PS-1206UWg - Manual (Page 73)

68
server through wireless LAN. If the wireless configuration
does not work, please plug the Ethernet cable again,
restart the print server and configure the print server
through Ethernet until the wireless LAN settings are correct.
8.4.2.1 Gener al Setting
You can enable/disable the wireless function and set
parameters that are used for the wireless stations to
connect to this print server from here. The parameters
include
“Function”, “Mode”, “ESSID” and “Channel
Number
”. You can manually set the parameters of wireless
LAN in this page or use the
“Site Survey” function to
automatically search for an available access point and
associate with it.
Function is for user to disable, enable or let the print
server auto select to connect to the wired or wireless
network. If
“Disable” is selected, the print server can only
connect to the network through wired Ethernet. If
“Enable”
is selected, the print server can only connect to the network
through W ireless LAN. If
“Auto” is selected, the print server
can automatically decide to enable or disable the wireless
function. The print server only can work in ether Ethernet or