Edimax Technology PS-1206UWg - Manual (Page 53)

48
7.9 TCP/IP Configuration
Double Click
“TCP/IP” icon and the TCP/IP configuration
window will pop-up.
You can configure the print server to automatically get IP
from DHCP server or manually specify static IP. The print
server also has a built-in DHCP server. You can enable this
DHCP server and let it manages IP for you.
Click the
“IP” button to enter the IP setting page. If you
need the print server to automatically get an IP from DHCP
server, select
“Auto IP”. You also can select “Static IP” to
manually assign
“IP Address”, “Subnet Mask” and
“Gateway” for the print server.
Click the
“DHCP Server” button to enter the DHCP server’s
setting page. You can
“Enable/Disable” the DHCP server or