Edimax Technology PS-1206UWg - Manual (Page 38)

33
9. Press Enter to select the newly created print server.
10. Select Print Server Configuration.
11. Select Printer Configuration.
12. Select Printer 0 (or Printer 1, Printer 2), and press
Enter, then select LPT1 (or LPT2, LPT3) in the Type field.
If your print server is with only one port, you do not need to
configure this Type field.
13. Press Escape, and answer Yes to the Save Changes
question.
14. Select Queues Serviced by Printer, then select Printer
0 (or Printer 1, Printer 2) and press Enter.
15. Press Insert and add your newly created print queue to
the list of queues serviced by the printer. Enter a priority