Edimax Technology PS-1206UWg - Manual (Page 37)

32
Improve productivity by locating the printer near the
workgroup.
Each print server should log into a NetWare server before
servicing the print jobs. Each print server will occupy a user
account with which it can log into the NetWare server.
5.2 NetWare 3.x/4.x/5.x Installation & Setup
Once your print server is connected to your Ethernet
network, you can set it up for use with your networking
software.
5.2.1 Installation Using PCONSOLE
5.2.1.1 Configuring as Print Server Mode
1. Run the NetWare PCONSOLE program.
2. Change the current file server, if necessary, using the
Change Current File Server menu selection.
3. Choose the Print Queue Information menu selection.
4. Press the Insert key to add a new print queue.
5. Type in a print queue name, such as
“PQ” or “Q1”.
6. You have now successfully created the print queue that
your print server will serve. Press the Escape key until the
Available Options main menu is displayed.
7. Select Print Server Information.
8. Press the Insert key to add a new NetW are print server
object. The print server name can be identical to the
PSxxxxxx name printed on the label of the print server.