Edimax Technology PS-1206UWg - Manual (Page 78)

73
8.4.3 TCP/IP
You can configure the print server to automatically get IP
from DHCP server or manually specify static IP. The print
server also has a built-in DHCP server. You can enable this
DHCP server and let it manages IP for you.
If you need the print server to automatically get an IP from
DHCP server, select
“Enable Obtain TCP/IP Settings
Automatically (Use DHCP/ BOOTP)
”. You also can select
“Disable Use the following TCP/IP Settings” to manually
assign
“IP Address”, “Subnet Mask” and “Gateway” for the
print server.
You can enable/disable or set auto for the print server
’s
DHCP server. The DHCP server is disabled by default. If
the DHCP Server is enabled or set Auto, you have to
assign a range of IP addresses here. Fill in the
“Start IP”,
“Range”, “DNS”, “Subnet Mask” and “Gateway”, and the
print server will assign a unique IP for each client. Note
that when
“Auto” is selected, the DHCP Server of the print
server will be enabled only when there is no other DHCP
Server within the network.