Dive numbering – SUUNTO Vyper User Manual

Page 35

Advertising
background image

33

MAX

°

C

TIME

NO

m

If set to NITROX Mode, the following information
will also be shown:

the oxygen percentage labeled with O

2

%

is shown on the left side of the center win-
dow

the current oxygen toxicity exposure shown

with an Oxygen Limit Fraction (OLF) bar
graph along the left side of the display
(instead of the CBT).

3.5.2. Dive Numbering

Several repetitive dives are considered to belong to
the same repetitive dive series when the dive comput-
er has not counted the no-fl ying time to zero. Within
each series, the dives are given individual numbers.
The fi rst dive of the series will be numbered as DIVE
1, the second as DIVE 2, the third as DIVE 3, etc.
If you start a new dive in less than 5 minutes at
the surface, the dive computer interprets this as a
continuation of the previous dive and the dives are
considered to be one and the same. The diving display
will return, the dive number will remain unchanged,
and the dive time will begin where it left off. After
5 minutes on the surface, subsequent dives are by
defi nition repetitive. The dive counter displayed in
the Planning Mode will progress to the next higher
number if another dive is made.

Fig. 3.30 Surface Mode after a
violated decompression dive.
The Er symbol indicates that
you have violated the ceiling
for more than three minutes.
You must not dive again for at
least 48 hours.

Dive Attention Symbol

Violated Decompression
Ceiling

Do Not Fly Symbol

Fig. 3.29 Surface interval, no-
fl ying time. Pressing the TIME
button twice will show the
no-fl ying time, indicated by an
airplane symbol.

MAX

°

C

TIME

DIVE

m

NO

NO

Advertising