SUUNTO Vyper - Manual (Page 47)

45
Press the SMART (Select) button once to change the
scroll buttons to scroll the different dives forward and
backward (Fig. 4.11). Press the SMART (>Select)
button again to change function of the scroll buttons
back to scroll the different pages of the selected dive.
When searching the dives, only the page I is shown.
The END text is displayed between the oldest and
the most recent dive (Fig. 4.12).
The memory will retain approximately the last 36
hours of dive time. After that, when new dives are
added, the oldest dives are deleted. The contents of
the memory will remain even when the battery is
changed (assuming that the replacement has been
done according to the instructions).
DIVE PROFILE MEMORY [PROF]
The scrolling of the profi le will start automatically
when the Logbook page IV (PROF) is entered.
The dive time is displayed in 20 second increments
(the recording interval can be set to 10s, 30s or 60s
increments with the optional PC-interface and its
software) with each display being shown for about
three seconds. The depths shown are the maximum
values of each interval.
Pressing any button stops the scrolling of the
profi le.
NOTE! Several repetitive dives are considered to
belong to the same repetitive dive series if the no-
fl ying time has not ended. See “Dive Numbering”
in section 3.5.2. for further information.
Fig. 4.10 Logbook, page IV.
Profi le of the dive.
Fig. 4.12 Logbook, end of the memory.
The END text is displayed between the
oldest and the most recent dive.
DIVE
TIME DIVE
page 4
QUIT
DIVE
TIME
SELECT
QUIT
Fig. 4.11 Logbook, page I.
Press the SMART (Select)
button once to be able to scroll
between the different dives.