Set modes [3 set, Dive parameter settings [1 set dive – SUUNTO Vyper User Manual

Page 52

Advertising
background image

50

4.3. SET MODES [3 SET]

The Set Modes (Fig. 4.22) are divided into three sub-
modes for setting the dive-related parameters, time
related parameters and your personal preferences.

4.3.1. Dive Parameter Settings
[1 SET DIVE]

To enter the Dive Parameter Setting Mode select
MODE- 3 SET- 1 SET DIVE (Fig. 4.23). The Dive
Parameter Setting mode has two to four options
depending on the dive computer mode. In GAUGE
Mode there are two options, in AIR Mode three op-
tions and in NITROX Mode four options.

4.3.1.1. Altitude Adjustment and
Personal Adjustment Settings
[1 AdJ MODE]

The current Altitude and Personal Adjustment
Modes are shown when diving and at the surface.
If the mode does not match the altitude or personal
conditions (see section 3.7. “High Altitude Dives
and Personal Adjustment”), it is imperative that you
enter the correct selection before diving. Use the
Altitude Adjustment to select the correct altitude
mode. Use the Personal Adjustment to add an extra
level of conservatism.

NOTE! New altitude and personal adjustment
selections cannot be made until 5 minutes after
the dive.

Fig. 4.22 Setting Options.
[3 SET].

Fig. 4.23 Dive Parameter Set-
ting Mode.
[1 SET DIVE].

Fig. 4.24 Altitude Adjustment and Personal Adjust-
ment Setting Mode.
[1 AdJ MODE].

QUIT

OPTIONS

SELECT

SELECT

SELECT

Advertising