SUUNTO Vyper - Manual (Page 51)

49
4.2.2. Dive Planning Simulator
[2 SIM PLAN]
The Dive Planning Simulator Mode shows you
the present no-decompression limits. In this mode,
you are able to add the desired surface interval
increment to present surface interval time, which
allows you to plan your dives in advance.
This mode is also used to add the desired surface
intervals for dive simulations. Add the desired sur-
face interval increment to present surface interval
by pressing the arrow down (TIME) and arrow up
(PLAN) buttons.
NOTE! This display is only shown for repetitive
dives.
To enter the Dive Planning Simulator Mode select
MODE- 2 SIMUL- 2 SIM PLAN (Fig. 4.19).
Fig. 4.21 Dive Planning
Simulation.
Fig. 4.19 Dive Planning
Simulator Mode.
[2 SIMPLAN].
Fig. 4.20 Selected Dive
Planning Simulator Mode.
Add the desired surface interval
increment (to present shown
surface interval) by pressing
the TIME and PLAN buttons.
NOTE! This display is only
shown for repetitive dives.
SELECT
TIME
SURF
OK
QUIT
DIVE
NO DEC TIME
MAX