SUUNTO Vyper - Manual (Page 43)

41
Fig. 4.1 Main menu based
Mode options. [3 MODE].
Fig. 4.2 Memory option.
[1 MEMORY].
Fig. 4.3 Simulation option. [2
SIMUL].
4. MENU BASED MODES
The main menu based functions include the
1) memory, 2) dive simulator and 3) setting modes.
THE USE OF THE MENU BASED FUNC-
TIONS
1. Activate the menu based modes by pressing
once
the SMART (MODE) button in the Dive
Mode (Fig. 4.1).
2. Scroll the mode options by pressing the arrow
up/down buttons. When scrolling the options,
the label and an equivalent number are shown
on the display (Fig. 4.2 - 4.4).
3. Press the SMART (Select) button once to
select the desired option.
4. Scroll the submode options by pressing the
arrow up/down buttons. When scrolling the
options, the label and an equivalent number
are shown on the display.
5. Select the desired option by pressing once
the
SMART (Select) button. Repeat the
procedure, if there are more submodes.
6. Depending on the mode, you are now able to
have a look at the memories, simulate a dive,
or make desired settings (use the the arrow
up/down buttons). The SMART button is
used to Quit or to confi rm the settings (OK).
If you do not press any of the buttons for 5 minutes
while in a Menu based mode, the instrument beeps
and returns to the timekeeping display automatically.
In the Simulation Mode, however, the equivalent
time is 60 minutes.
TIP!
By pressing the SMART button for more than 1
second, any menu based function or submode can
be quit and the dive computer will return directly to
the Dive Mode.
OPTIONS
QUIT
SELECT SELECT SELECT
SELECT