SUUNTO Vyper - Manual (Page 49)

47
The data transfer is carried out using the connector on the bottom of the unit.
The following data is transferred to the PC:
• depth profi le of the dive
• dive time
• surface interval time
• dive number
•
Altitude and Personal adjustment settings
• oxygen percentage setting and maximum OLF (in NITROX Mode)
•
tissue calculation data
• temperature at the maximum depth, beginning of the dive, and end of
the dive
• dive entry time (year, month, day and time)
• additional dive information (e.g. SLOW and Mandatory Safety Stop
violations, Dive Attention Mark, Bookmark, Surfaced Mark, Decom-
pression Mark, Ceiling Error Mark)
• identity number of the dive computer
• personal information.
It is also possible to manually add comments and other personal information to
the PC based dive data fi les. The PC-Interface package comes complete with the
interface unit, the software, and an instruction and getting started guide.
To enter the Data Transfer select MODE- 1 MEMORY- 3 TR - PC (Fig. 4.15).
NOTE! While in the Data Transfer Mode, the connector/water contacts are
used only for the data transfer. The Dive Mode IS NOT automatically activated
if the contacts are submerged.
After you have fi nished the data transfer, press the SMART (Quit) to exit Data
Transfer Mode [TR-PC]. If no button is operated or no data is transferred within
5 minutes, the instrument beeps and returns to the timekeeping display automati-
cally.